Need help with Giddy-Up?
To lodge a support enquiry, please fill out our Support Enquiry Form and one of our friendly staff will respond as soon as they are able.
2nd Generation Decoder (small black box)
(only some venues in NSW and TAS will have this type of decoder)
As Giddy-Up is connected via video lead to the SKY Channel racing decoder it is very likely going to be located nearby (within 2 to 3 metres max). To ensure efficient running of the Giddy-Up decoder ideally it should be located in a cool / air conditioned area with ventilation to avoid overheating of the unit.
Front of 2nd Generation Decoder
To reset the decoder, hold down the button on the far right-hand side until the green power light goes off – release the button and wait for approx 5 seconds before pressing the same button in (don’t hold down).
Back of 2nd Generation Decoder
There should be three cords running into the back of the Giddy-Up decoder
- The power cord will be a small D/C lead that plugs in on the right hand side of the two small fans.
- In the middle of the decoder is the RCA video output that connects into the Giddy-Up modulator or in house distribution system. Each venue will have its own system, you should take care to only check and adjust cords that are specifically related to the Giddy-Up system.
- On the right of the decoder above the fans is the video input RCA for the lead that comes from the SKY decoder.
